How to Replace a Fuel Filter
Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.
WARNING: Remember at all times that gasoline is highly flammable. Keep a fire extinguisher nearby whenever you are working with the fuel system. Avoid smoking, and keep any sparks or other sources of ignition away from the vehicle and fuel tank. Never use an incandescent trouble light near the fuel tank because the hot surface of the light bulb can ignite any fuel that might spill or splash on it. Fuel vapors are heavier than air and can also travel a long distance along the garage floor. Be aware of any electrical equipment that could ignite the spilled fuel. Work with caution.
1
Park the vehicle on a solid, level surface.
2
Relieve the pressure in your fuel system. The fuel injection system operates under very high pressure and to relieve the pressure follow these steps:
- Relieve the fuel tank pressure by loosening the gas cap.
- Remove the fuel pump fuse or relay (refer to your owner's manual for location).
- Start and run the engine until the fuel in the lines is used up and the engine stops.
- Crank the engine for two seconds to remove any remaining pressure.
3
Disconnect the negative battery cable from the battery.
4
Locate the fuel filter in the engine compartment or underneath the vehicle near the fuel tank. If necessary, raise the rear of the vehicle and support it with jack stands. Disconnect the fuel lines from the fuel filter.
Note: On older vehicles with carbureted engines, fuel lines are attached with simple hose clamps. On fuel injected engines, the fuel lines are attached with clamps, or with quick lock couplings, which require a special tool to remove. On some import cars, the fuel lines are attached to the fuel filter with banjo fittings. The copper washers on the banjo fittings must be replaced when the fuel filter is changed.
5
Remove the fuel filter mounting bolts if applicable. Remove the fuel filter.
6
Compare the new filter to the old one to verify that you have the correct part. Install the new fuel filter making sure that the flow arrow is pointing toward the engine. Reinstall the mounting bolts if applicable.
7
Secure the lines back onto the fuel filter and reinstall the fuel pump fuse.
8
Reconnect the negative battery cable. Lower the vehicle if applicable.
9
Start the engine and check for fuel leaks.
Note: The engine may not start easily on the first try due to lack of fuel, but it should start as the pressure increases and the fuel reaches the injectors.
10
Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.
Mechanical engineering
From Wikipedia, the free encyclopedia
Mechanical engineering is a discipline of engineering that applies the principles of engineering, physics and materials science for analysis, design, manufacturing, and maintenance of mechanical systems. It is the branch of engineering that involves the production and usage of heat and mechanical power for the design, production, and operation ofmachines and tools.[1] It is one of the oldest and broadest engineering disciplines.
The engineering field requires an understanding of core concepts including mechanics, kinematics, thermodynamics,materials science, structural analysis, and electricity. Mechanical engineers use these core principles along with tools like computer-aided engineering, and product lifecycle management to design and analyze manufacturing plants, industrial equipment and machinery, heating and cooling systems, transport systems, aircraft, watercraft, robotics,medical devices, weapons, and others.
Mechanical engineering emerged as a field during the industrial revolution in Europe in the 18th century; however, its development can be traced back several thousand years around the world. Mechanical engineering science emerged in the 19th century as a result of developments in the field of physics. The field has continually evolved to incorporate advancements in technology, and mechanical engineers today are pursuing developments in such fields as composites, mechatronics, and nanotechnology. Mechanical engineering overlaps with aerospace engineering, metallurgical engineering, civil engineering, electrical engineering, petroleum engineering,manufacturing engineering, chemical engineering, and other engineering disciplines to varying amounts. Mechanical engineers may also work in the field ofBiomedical engineering, specifically with biomechanics, transport phenomena, biomechatronics, bionanotechnology and modeling of biological systems, like soft tissue mechanics.
what is a car tune up
Regular engine tune-ups bring power and efficiency back to your car. At Firestone Complete Auto Care, we visually inspect all of your engine components and install new parts (including spark plugs and fuel filters) as needed.
After a Firestone Complete Auto Carecar tune-up, you'll discover your engine starts easier, runs smoother and is more efficient. A regular engine tune-up will lower emissions, improve fuel economy and restore lost power.
When you get car tune-ups based on your vehicle manufacturer's recommendations, you're investing in the long-term health of your car, saving you time and money.
Suscribirse a:
Entradas (Atom)